TECHNOMELT PA 6208

在室内和室外环境下，与多种基材粘接性** 应用: 粘接塑料制品 性能温度: -40°C~100°C 颜色: 琥珀色 / 黑色 肖氏硬度: 82A 安全等级: UL 94-V0 UL RTI 95°C

TECHNOMELT PA 6208 BLACK

HENKEL 6208 UL94V-0黑色（热熔胶）


- Consistent glossy, black color
- 95℃ UL RTI rated
- Low viscosity
- High adhesion strength to challenging surfaces
- High dielectric strength
- Improved flexibility at low temperatures


· Formerly known as MACROMELT MM 6208S
· Consistent glossy, black color
· Low viscosity
· High adhesion strength to challenging surfaces
· High dielectric strength
· Improved flexibility at low temperatures
· Compatible with Henkel materials
· Excellent adhesion to a range of substrates in outdoor and indoor environments


TECHNOMELT PA 6208
在室内和室外环境下，与多种基材粘接性**


应用: 粘接塑料制品
性能温度: -40℃~100℃
颜色: 黑色
肖氏硬度: 82A


Viscosity @ 210 ℃, mPa?s (cP) : 3,200
Density, g/cm3 : 0.98
Softening Point, ℃ : 155
Elongation , at break,%  : 450
Low Temperature Flexibility, ℃  : -40
nourde low pressure molding material solutions
UL Certification /ul/cert.aspx?ULID=226883


TDS技术参数表 : HENKEL TECHNOMELT PA 6208










Application:
Application Temperature: 180 to 230℃
Application System: Hot Melt Application System


When bonding to a substrate with high thermal conductivity the use of
a specific application temperature is required for good wetting. Do not
heat the product above the specified application temperature range.


When the product is not in use do not apply heat, this will degrade the
quality of the product and in extreme cases cause carbonization.
TECHNOMELT PA 6208 BLACK (e) may absorb moisture from the air.
This will not be apparent in the solid form, but may cause bubbles on
heating and could affect the bond quality. It is important, therefore, that
containers are kept closed and sealed when not in use.


Cleaning:
Carbonized and set (non thermoplastic) material must be removed
mechanically. Removal of the thermoplastic material from the hot
apparatus can be achieved with solvent free cleaning system, such as
Technomelt 0062 (see separate technical information).


Storage:
Store in a cool, dry location, with the container tightly closed. When
not in used, this product will have a shelf life of at least 24 months.
nourde polyamide low pressure molding