TECHNOMELT PA 668

TECHNOMELT PA 668 WHITE


TDS/s/1OGJUN6HRI7mo8GCMFLM8cg
U L/ul/cert.aspx?ULID=102012836


TECHNOMELT PA 668 CLEAR/s/1fDE2BMBxZksxDArafyXZ1g


PRODUCT DESCRIPTION
TECHNOMELT PA 668 WHITE (e) provides the following
nourde low pressure molding material solutions
Product characteristics:
Technology : Polyamide
Appearance : White , Black , Clear
Application : Molding compound thermoplastic
Cure : Physical setting
Typical Applications : Encapsulation
Flammability Rating : UL 94 V-0


TECHNOMELT PA 668 WHITE (e) is used for molding applications.


Application:
Application Temperature: 180 to 230oC
Application System: Hot Melt Application System
When bonding to a substrate with high thermal conductivity the use of
a specific application temperature is required for good wetting. Do not
heat the product above the specified application temperature range.
When the product is not in use do not apply heat, this will degrade the
quality of the product and in extreme cases cause carbonization.
TECHNOMELT PA 668 WHITE (e) may absorb moisture from the air.
This will not be apparent in the solid form, but may cause bubbles on
heating and could affect the bond quality. It is important, therefore, that
containers are kept closed and sealed when not in use.


Cleaning:
Carbonized and set (non thermoplastic) material must be removed
mechanically. Removal of the thermoplastic material from the hot
apparatus can be achieved with solvent free cleaning system, such as
Technomelt PA 62 (see separate technical information).


Storage:
Store in a cool, dry location, with the container tightly closed. When
not in used, this product will have a shelf life of at least 24 months.






抗紫外线和**热稳定性，即使暴露于恶劣的外部环境仍能保持颜色一致性。


TECHNOMELT PA 668
  
即使在暴露于恶劣的外部环境内也能保持白色
抗紫外线和热稳定性
优良的注塑成型和色彩一致性特性
适合室内和室外LED照明，家用消费品和工业传感器






Technology : Polyamide
Appearance : White
Application : Molding compound thermoplastic
Typical Applications : Encapsulation
Flammability Rating : UL 94 V-0
Application Temperature: 180 to 230℃
Application System: Hot Melt Application System
Polyamide adhesive - nourde Adhesives


材质：Polyamide聚酰胺
外观：白色
应用：低压注塑  / 封装
阻燃：UL 94 V-0
温度：180至230℃


即使在暴露于恶劣的外部环境内也能保持白色
抗紫外线和热稳定性
优良的注塑成型和色彩一致性特性
适合室内和室外LED照明，家用消费品和工业传感器






TECHNOMELT PA 668 WHITE
抗紫外线，增强的室外热稳定性


应用： 耐高温
性能温度： -25℃~130℃
颜色： 白色
肖氏硬度： 90A
安全等级： UL 94-V0


Viscosity @ 210 ℃, mPa?s (cP) : 3,600
Density, g/cm3 : 0.98
Softening Point, ℃ : 155
Elongation , at break,%  : 650
Low Temperature Flexibility, ℃  : -25


UL Certification /ul/cert.aspx?ULID=102012836

TDS技术参数表 : TECHNOMELT PA 668 WHITE